Photos

> >

Image Gallery

Keyword: Category: Tag: Sort By:

Portales High School Math Engineering and Science Achievement club members operate the sensor of an AC-130W during a tour, Dec. 9, 2016 at Cannon Air Force Base, N.M. The tour, which consisted of an AC-130 technology brief and an in-depth look at a powered-on AC-130W, was designed to give students a practical look at real world math, engineering and science applications. (U.S. Air Force photo by Staff Sgt. Whitney Amstutz/Released)

16th SOS hosts, teaches local MESA students

Portales High School Math Engineering and Science Achievement club members operate the sensor of an AC-130W during a tour, Dec. 9, 2016 at Cannon Air Force Base, N.M. The tour, which consisted of an AC-130 technology brief and an in-depth look at a powered-on AC-130W, was designed to give students a practical look at real world math, engineering and science applications. (U.S. Air Force photo by Staff Sgt. Whitney Amstutz/Released)

Related Imagery

Senior Airman Darren Pizarro, 27th Special Operations Civil Engineer Squadron electrical systems specialist, replaces a faulty bulb in a light pole at Cannon Air Force Base, N.M., June 27, 2017. Specialists such as Pizarro are responsible for installing, repairing and maintaining electrical networks, ensuring that primary sources of energy are always available. From space command communicating with satellites to hospitals operating lifesaving equipment, every Air Force function depends on this crucial service provided by these experts. (U.S. Air Force photo by Senior Airman Lane T. Plummer)

Senior Airman Darren Pizarro, 27th Special Operations Civil Engineer Squadron electrical systems specialist, drives his work truck to the next work site at Cannon Air Force Base, N.M., June 27, 2017. Pizarro and his peers at the base electrical shop have already handled over 600 requests this year. (U.S. Air Force photo by Senior Airman Lane T. Plummer)

Shawn Cordaro, 27th Maintenance Squadron Aircraft Metals Technology work lead, drills a hole through a no-load fixture at Cannon Air Force Base, New Mexico, June 21, 2017. This fixture is used when maintenance is doing maintenance on a C-130. It helps keep the aircraft from moving. (U.S. Air Force photo by Staff Sgt. Michael Washburn/Released)

Airman 1st Class Patrick Ragan, 27th Maintenance Squadron Aircraft Metals Technology apprentice, grinds down a low-pac cover at Cannon Air Force Base, New Mexico, June 21, 2017. The cover had hair-line cracks that first needed to be filled before they were smoothed out with the grinder. (U.S. Air Force photo by Staff Sgt. Michael Washburn/Released)

Shawn Cordaro, 27th Maintenance Squadron Aircraft Metals Technology work lead, works on a no-load fixture at Cannon Air Force Base, New Mexico, June 21, 2017. This fixture is used when maintenance is doing maintenance on a C-130. It helps keep the aircraft from moving. (U.S. Air Force photo by Staff Sgt. Michael Washburn/Released)

Airman 1st Class Christopher Brown, 27th Maintenance Squadron Aircraft Metals Technology apprentice, measures the width of a piece of metal in a precision lathe at Cannon Air Force Base, New Mexico, June 21, 2017. Brown has been training for the last eight months and will be finished in November. Each Airman has to be trained on every piece of equipment in the shop. (U.S. Air Force photo by Staff Sgt. Michael Washburn/Released)

Shavings fly off a metal rod in a lathe at the 27th Special Operations Maintenance Squadron Metals Technology shop at Cannon Air Force Base, New Mexico, June 21, 2017. The tolerances for the lathe that Brown is working on can be a thousandths of an inch or more. (U.S. Air Force photo by Staff Sgt. Michael Washburn/Released)

Airman 1st Class Patrick Ragan, 27th Maintenance Squadron Aircraft Metals Technology apprentice, grinds down the side of low-pac cover at Cannon Air Force Base, New Mexico, June 21, 2017. The metals tech shop can fabricate or fix parts for any aircraft here at Cannon. (U.S. Air Force photo by Staff Sgt. Michael Washburn/Released)

Airman 1st Class Christopher Brown, 27th Maintenance Squadron Aircraft Metals Technology apprentice, fits a piece of metal into a precision lathe at Cannon Air Force Base, New Mexico, June 21, 2017. The tolerances for the lathe that Brown is working on can be a thousandths of an inch or more. (U.S. Air Force photo by Staff Sgt. Michael Washburn/Released)

Airmen from the 16th Special Operations Squadron hang up the U.S. flag as they prepare for takeoff during a ‘fini flight’ at Cannon Air Force Base, New Mexico, Jun. 9, 2017. Dating back to World War II, the U.S. military has celebrated pilots’ and other experienced officers’ final flights either at their current unit or their career. Pilots use these celebrations as another opportunity to help train accompanying Airmen on their roles aboard the aircraft to ensure mission readiness. (U.S. Air Force photo by Senior Airman Lane T. Plummer)

Lt. Col. Richard Hollinger, former 9th Special Operations Squadron assistant director of operations, pilots his aircraft during his ‘fini flight’ at Cannon Air Force Base, New Mexico, Jun. 9, 2017. Dating back to World War II, the U.S. military has celebrated pilots’ and other experienced officers’ final flights either at their current unit or their career. Pilots use these celebrations as another opportunity to help train accompanying Airmen on their roles aboard the aircraft to ensure mission readiness. (U.S. Air Force photo by Senior Airman Lane T. Plummer)

Staff Sgt. Whitney Amstutz
161209-F-CV765-200.JPG

DOWNLOAD PHOTO
(0.66 MB)

Tags

Back to Main Gallery